Advance Appliances TSDC Direct Vented Single Coil Thermal Store Cylinders 140 Litre

Advance Appliances TSDC Direct Vented Single Coil Thermal Store Cylinders 140 Litre
£929.98 inc VAT
Quantity

The earliest delivery date may vary based on your postcode.

  • Free Delivery
  • Express Delivery
  • Nominated Delivery
  • 14 Day Returns
Learn More

Advance Appliances TSDC Direct Vented Single Coil Thermal Store Cylinders

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house. They work on the thermal store principle of storing central heating water and providing mains fed hot water via a powerful coil for power showering and quick bath filling. The coil is not pumped. The thermal store acts as a buffer for fast radiator heat up and boiler efficiency.

The direct pattern cylinder (TSDC) without the integrated feed and expansion tank has to be fed with a remote F and E tank sited above the highest point of the radiator circuit. You need two pumps - one for the boiler to keep the store hot - controlled by the thermostat on the store, and one for the heating circuit - controlled by the room thermostat and heating programmer.

These low maintenance pre plumbed units provide flow rates up to 30 litres per minute and if linked to the appropriate gas, oil, solid fuel, biomass or other appliance (except Heat Pumps) are suitable for average to larger properties. The units look smart too, with a wipe-clean appliance finish, and the insulation is 60mm foam injected for maximum efficiencies.

Product Specification

Name Advance Appliances TSDC Direct Vented Single Coil Thermal Store Cylinders 140 Litre
Product Code 159688
MPN TSDC 140
Type Thermal Store
Sub Type Direct
Colour White
Warranty (Years) 10
Height (mm) 1086
Diameter (mm) 600
Weight (Kg) 40
Weight Empty (Kg) 40
Weight Full (Kg) 190
ErP Water Heating Efficiency B
Min Bar Pressure) 1
Max Bar Pressure 3
Flow Rate (L/min) 20
Capacity (Litres) 140
Mounting Floor
Material Stainless Steel
Advance Appliances Vented Thermal Store Data Sheet

Settings