Fabdec Excelsior 215L Slimline Direct Unvented Cylinder

Fabdec Excelsior 215L Slimline Direct Unvented Cylinder - WT-0215-D2F5-A3
£663.98 inc VAT
RRP £1,260.00 You Save £596.02

The earliest delivery date may vary based on your postcode.

Fulfilled by Fabdec
  • Free Delivery
  • 14 Day Returns
Learn More

Fabdec Excelsior Slimline Direct Unvented Cylinders

Direct Cylinder - Heated by an electric immersion heater only. Not suitable for connection to a Boiler.

Unvented Cylinder - Pressurised unit, fed directly from mains water. No header tank required.

The Fabdec Excelsior Direct Slimline is an electric only unvented hot water cylinder that uses 2 x 3kW electric immersion heaters as its power source, and comes complete with a expansion vessel & unvented kit. This unvented cylinder will provide hot water at mains water pressure without the need for a separate gas boiler, making it ideal for apartments and properties without a gas supply, or as an additional source of hot water.

  • Electric only
  • Slimline 500mm diameter
  • Expansion vessel and unvented kit included
  • Immersion heater - rated @ 3kW, 240V, single phase, incoloy 825, with thermostat and independent cut-out
  • Thermal insulation - CFC/HCFC free, (ODP zero), 60mm fire retardant insulation GWP=1
  • Outer casing - PLASTISOL
  • Inner cylinder - Duplex stainless steel
  • High performance finned heating coil
  • Indirect thermostat - factory fitted twin thermostat with independent reset, 30-70°C
  • Safety device - all units factory fitted with 7bar/90°C pressure & temperature relief valve
  • Inlet/Outlet
  • Primary flow and return connections
  • EXCELSIOR inlet diffuser for optimal blending of cold and hot water
  • Internal or external expansion
  • 60mm insulation
  • Pressure test - all cylinders tested to 15 bar
  • Insulated T&P valve
  • No anode required
  • 25 year internal cylinder guarantee
  • 1 year guarantee available on all components, see separate installation manual for further details
  • Direct thermostat - element thermostat, nominal setting 60°C
  • Cylinder range - 130, 150, 175, 215, 244 litre. Other capacities available on a bespoke basis
  • Indirect model - fitted with 22mm diameter stainless steel high performance coil and 1 immersion heater
  • Direct model - 80L fitted with 1 immersion heater - 130 - 305L fitted with 2 immersion heaters

Product Specification

Name Fabdec Excelsior 215L Slimline Direct Unvented Cylinder - WT-0215-D2F5-A3
Product Code 119303
MPN WT-0215-D2F5-A3
Type Unvented Cylinder
Sub Type Direct
Colour White
Warranty (Years) 25
Height (mm) 2020
Diameter (mm) 500
Weight (Kg) 45
ErP Water Heating Efficiency A
Capacity (Litres) 215
Fuel Electric Only
Material Stainless Steel
RRP £1,260.00 You Save £596.02