Gledhill BoilerMate BP Cylinder
Mains Pressure Hot Water Thermal Store Cylinder
The Gledhill BoilerMate is a Thermal Store Cylinder that will provide Mains Pressure hot water to suit Unvented and Open vented systems.
The BoilerMate is supplied with primary water from the boiler which heats the store via a primary coil. Secondary water flows directly from the cold mains into a secondary coil where it is heated by the stored water. Unlike unvented stainless steel cylinders, Boiler mate does not require expensive safety controls or the need for pressure relief pipework and expansion vessels. The Boiler Mate can be used with Gas or Oil boilers, and is available in 5 sizes from 125 litres to 225 litres.
- Can be used Unvented and Open vented.
- Open vented Thermal Store
- No G3 installation requirements
- No need for safety controls and expansion vessels.
- Mains pressure hot water giving "power shower" performance.
- Up to 22 litres per minute filling a standard bath in 3-4 minutes.
- Increased efficiency & reduced running costs.
- No annual service required.
- 10 Year Manufactures Guarantee.