zip-inline-es6-electronic-instantaneous-55kw-water-heater

Zip Inline ES6 Electronic Instantaneous 5.5kW Water Heater

£354.28 (Inc. VAT)

7 In Stock

FREE DELIVERY

Description

 Back

Zip Inline ES6 Electronic Instantaneous 5.5kW Water Heater

The Zip Inline ES Electronic Instantaneous Water Heater is designed specifically for hand washing. The Zip Inline ES Electronic Instantaneous Water Heater from Plumbnation allows water to be heated as and when you need it.

The Zip Inline ES Instanteous Water Heater is part of the Zip Inline Water Heaters from Zip Water Heaters. Zip Inline ES Electronic Instantaneous Water Heater appliance must be installed in a frost free environment. The appliance is intended for connection to the mains water supply. It should be installed by a suitably qualified person. The appliance may be used as an unvented or vented installation.

The Zip Inline Water Heater must be earthed and connected to the supply by means of permanent wiring through suitable isolation having a contact separation of at least 3mm in all poles. Installation must comply with current IEE regulations. The cross sectional area of the connection cable must be in accordance with the power rating of the appliance.

  • Water runs at the right temperature, right away; no water is heated & stored - so no energy waste, no water waste!
  • Bare wire technology heats water - fast
  • 5.5kW output
  • Automatically adjusts to variable inlet pressure
  • Switches on when minimum flow rate exceeded
  • Impact resistant plastic
  • Factory-set at 38C
  • Energy conservation: no standing heat loss - Zip Inline ES heats water as required!

Deciding on the most suitable type of Water Heater is a major decision. When you decide that Instantaneous Water Heaters give the appropriate solution then the Zip ES6 is without doubt worth putting on the shortlist.

Documents


Specifications

 Back
Zip Inline ES6 Electronic Instantaneous 5.5kW Water Heater Specifications
Water Heater Type Instantaneous Water Heaters
Capacity 0 Litres
Output 5.5 Kilowatts
Height 135 mm
Width 186 mm
Depth 87 mm
EAN 5036764424047
MPN ES6
Product Code 106639
Type Water Heater
Sub Type Instantaneous Water Heater
Colour White
Warranty (Years) 1
Width (mm) 186
Height (mm) 135
Depth (mm) 87
Output (Kilowatts) 5.5
WRAS Approved 1
Flow Rate (L/min) 3
Mounting Wall
Material Stainless Steel
Fitting Location Wall Mounted
Range ES6

Zip Inline ES6 Electronic Instantaneous 5.5kW Water Heater

ES102715

£354.28 (Inc. VAT)

Stock status: 7 In Stock
FREE DELIVERY

Check Delivery Availability

This product is delivered directly by the manufacturer, to confirm they can deliver to your address enter your postcode below.


30 Day Returns

Returns Policy - Changed Your Mind?

If you change your mind about the product when you receive it you can notify us any time within 30 days and return it for a full refund at your own cost. Any refunds will be made within 30 days of receiving your returned item. You are expected to cover the cost to return the item and your initial delivery charge will not be refunded.

More details here

Often bought with

Similar products