Gledhill Stainless Lite Plus Flexible Buffer Store Cylinders

Buffer vessels are simply a duplex stainless steel tank that contains a volume of water, increasing the overall volume of the heating distribution system. This extra volume of water is designed to absorb any extra heat generated by the heat pump in low load conditions.

If the building cannot absorb the extra heat generated the return temperature to the heat pump will increase and will potentially cause the heat pump to turn off. If the temperature drops in the water returning to the heating appliance, then it will turn itself back on. If this cycling occurs at a greater frequency than the minimum run time for the appliance, this is classed as short cycling. The aim of a buffer vessel is to remove the possibility of any short cycling of the heating appliance.

• Open vented duplex stainless steel cylinder
• Provides connections for multiple inputs
• Suitable for use with air source or ground source heat pumps, wood burning stoves or open vented boilers
• Designed to directly supply the heating circuit
• Works up to 3.5 bar pressure
• ErP rating: B
• Determining the correct kind of Cylinder is a key decision. After you determine that Heat Pump Cylinders deliver the best answer then the Gledhill Stainless Lite Plus Flexible Buffer Store Cylinder 120 Litre - PLU120MB is definitely worth considering.