Speedfit fittings have been designed for use with both plastic and copper pipe, in diameters of 10mm to 28mm, and are approved by the Water Research Centre within the requirements of the UK Water Fittings Byelaws Scheme.
The twist and lock Speedfit fittings have a collet with stainless steel teeth and 'O' ring to provide a permanent leak-proof seal. A simple twist of a screw cap locks the pipe into position and increases the compression of the 'O' ring seal to give added security.
Speedfit products are fully certified by the British Board of Agreement, approved by the Water Regulations Advisory Scheme, and are kitemarked to BS7291, Parts 1 and 3.
Speedfit products are compatible with:
Mains fed and indirect cold water systems
Vented and unvented hot water systems
Vented central heated systems
Sealed central heated providing temperatures and pressures comply with BS7291 Parts 1 and 3 Class S
Please note: Speedfit should NOT be used for gas, fuel oil or compressed air applications.
Picking the right kind of Valve is an important decision. After you determine that Service Valves provide the best solution then the Speedfit Plastic Service Valves - 22SV is without doubt worth a serious look.
Specifications
Back
Speedfit Plastic Service Valves - 22SV Specifications
EAN
0665628039926
MPN
22SV
Product Code
153702
Type
Push Fit Fittings
Valve Type
Service Valve
Diameter (mm)
22
WRAS Approved
1
Speedfit Plastic Service Valves - 22SV
PN153702
£18.73(Inc. VAT)
FREE DELIVERY
Check Delivery Availability
This product is delivered directly by the manufacturer, to confirm they can deliver to your address enter
your postcode below.
If you change your mind about the product when you receive it you can notify us any time within 30 days and return it for a full refund at your own cost. Any refunds will be made within 30 days of receiving your returned item. You are expected to cover the cost to return the item and your initial delivery charge will not be refunded.