Key Information:

• Indirect, unvented hot water cylinder
• Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
• Factory-fitted 3kW immersion heater
• Rapid reheat
• Made from 316L Duplex stainless steel
• 22mm compression fittings and coils
• Full unvented kit supplied
• ERP C rating
• Lifetime manufacturing warranty on inner container (2 years on components)*

What's Included:

• Telford Tempest Indirect Unvented Hot Water Cylinder 90L - TSMI090
• Full unvented kit
• Factory-fitted 3kW immersion heater 
• Remote expansion vessel with factory-fitted wall mounting bracket

The Telford Tempest Indirect Unvented Hot Water Cylinder is an efficient hot water cylinder that provides a steady flow of hot water at high pressure. Manufactured from Duplex stainless-steel, the cylinders are supplied with a factory-fitted 3 kW immersion heater to provide back-up heat.

What is a indirect unvented cylinder?

Indirect cylinders feature a heat exchanger, which transfers heat from a boiler or another heat source to the water in the cylinder. For instance, the Telford Tempest Indirect Unvented Hot Water Cylinder features an internal coil and is designed for use with a gas or oil-fired boiler as the main heat source (either sealed system or open vented). Unvented cylinders are fully sealed and take water directly from the mains supply, meaning you don't need a cold water tank.

3kW immersion heater

The Telford Tempest Indirect Unvented Hot Water Cylinder 90L is fitted with a 3kW immersion heater as a back-up heating method. This ensures that you always have hot water on demand.

Made from Duplex 316L stainless steel

Duplex stainless steel has innumerable benefits, including: greater strength at a lower weight; increased corrosion resistance; resistance to stress cracking. These are important for durability, and ensure that your brand new cylinder lasts.

Fully insulated

The Telford Tempest Indirect Unvented Hot Water Cylinder is fully insulated, resulting in better efficiency as it prevents heat from escaping the cylinder.

ERP C rating

The Telford Tempest Indirect Unvented Hot Water Cylinder has an ERP C rating, which is compliant with the current European Energy-related Products Directive standards.