Designed specifically where floor drainage is required but where space underneath is very limited e.g. wet rooms. This two part kit with a powerful shower waste pump and a choice of three waste designs can pump up to 3m vertically as well as 30m horizontally. Higher flow rate means it can be used with powerful 'rain head' showers.

• Sanifloor + 1: suitable for use with tiled floors within a wet room environment
• Sanifloor + 2: suitable for use with vinyl floors within a wet room environment
• Sanifloor + 3: suitable for use with a shower tray within a wetroom or bathroom environment
• Sanifloor + 4: suitable for use with the Wedi former to create a tiled wet room

• Suits wet rooms and low level shower trays
• Ideal for high flow applications
• Pump and waste inlet can be up to 3m apart horizontally
• Dual function - sucks waste up from the gully and pumps waste water away up to 3m vertically or 30m horizontally
• Pump can be sited up to 300mm above the gully
• All gully types are 90mm in diameter
• Dimensions (height x width x depth) - 295 x 164 x 191
• Discharge pipe diameter (mm) - 32
• Electrical supply (V/Hz) - 220-240 / 50
• Horizontal discharge (m) - 30
• Max. amperage (A) - 16
• Min. gravity fall on horizontal run - 1
• Wattage - 400

Determining the most suitable type of Pump is a key decision. When you decide that Macerators provide the appropriate solution then the Saniflo 6156 is assuredly worth a serious look.